Bennett Marine Inc

Is this your listing? Claim it here!
550 Jim Moran Blvd,, Deerfield Beach, FL, Florida 33442, USA
Bennett Marine Inc
Is this your listing? Claim it here!

Bennett Marine Inc

550 Jim Moran Blvd,, Deerfield Beach, FL, Florida 33442, USA

Get a quote or send a message to
Bennett Marine Inc




Reviews

Tom
February 10, 2015
business , Fort Lauderdale, FL
Great equipment
This Riviera 48-foot S/F "Bone Cutter" came with boat leveller trim tabs and actuators. The problem was when the rear fuel tank is full, the 46" x 8" tabs were too small to handle the load, so we were always cruising with the tabs fully extended, plus I have had to repair the exposed tubing on the rams several times. I had the 4 pockets filled in at Playboy Marine and installed Bennett 48" x 12" tabs complete with new rams. We splashed the boat and had her out in the ocean; now the stern pops out of the water and the boat handles much better. Great equipment guys, keep up the good work.
Did you find this review helpful?
Dante
February 10, 2015
business , Marina del Ray, CA
Thank you
I have been in retail for 22 years and I know good customer service when I see it. I have not seen this good a service in a long time. I purchased a cruiser which had the HPU missing. The fact that I am new to boating did not help, but what did help was the Bennett staff and in particular Mr. M.J. Thomas. Through a series of emails I am now enjoying a faster, more fuel efficient ride. Thanks Bennett and all your staff.
Did you find this review helpful?
Josh
February 10, 2015
business , Captain
Quick work!
When I needed replacement tabs for my Tiara, they suggested I call Bennett directly. Within 10 minutes my tabs were on the way and I was going about the rest of my day. Great customer service, thanks Sandra!
Did you find this review helpful?

Location

550 Jim Moran Blvd,, Deerfield Beach, FL, Florida 33442, USA
Get directions
5.0
14 Reviews
Write a review
Tom
February 10, 2015
business , Fort Lauderdale, FL
Great equipment
This Riviera 48-foot S/F "Bone Cutter" came with boat leveller trim tabs and actuators. The problem was when the rear fuel tank is full, the 46" x 8" tabs were too small to handle the load, so we were always cruising with the tabs fully extended, plus I have had to repair the exposed tubing on the rams several times. I had the 4 pockets filled in at Playboy Marine and installed Bennett 48" x 12" tabs complete with new rams. We splashed the boat and had her out in the ocean; now the stern pops out of the water and the boat handles much better. Great equipment guys, keep up the good work.
Did you find this review helpful?
Dante
February 10, 2015
business , Marina del Ray, CA
Thank you
I have been in retail for 22 years and I know good customer service when I see it. I have not seen this good a service in a long time. I purchased a cruiser which had the HPU missing. The fact that I am new to boating did not help, but what did help was the Bennett staff and in particular Mr. M.J. Thomas. Through a series of emails I am now enjoying a faster, more fuel efficient ride. Thanks Bennett and all your staff.
Did you find this review helpful?
Josh
February 10, 2015
business , Captain
Quick work!
When I needed replacement tabs for my Tiara, they suggested I call Bennett directly. Within 10 minutes my tabs were on the way and I was going about the rest of my day. Great customer service, thanks Sandra!
Did you find this review helpful?
Greg & Kim
February 10, 2015
business , .
Very happy customers
We had problems with the boat leaning to one side or the other depending on the load or people moving around on the boat, now with the Bennett trim tabs it is not a problem. With a push of a button we can level the boat easily. We are very happy with system and the company behind the trim tabs.
Did you find this review helpful?
Bob
February 10, 2015
business , Fort Myers, FL
Decades of use
My story isn’t that unusual. A complete rebuild – stern to stern, from engine to bow eye. With one exception, the original Bennett Trim Tabs. You measure the useful life of most marine products in months, at most, years. With Bennett, it’s decades.
Did you find this review helpful?
Pete
February 10, 2015
Cooper City, FL , business , Captain
The best
As a small boat charter captain, there are three things that can never fail, your truck, your trailer and your boat. If you see Bennett on a boat, it’s a good bet that everything else was chosen for the same reasons. No one makes a better product or stand behind their owners like Bennett.
Did you find this review helpful?
Michael
February 10, 2015
Norwest Marine , business , Parts dept.
Last forever
Once they’re installed correctly, you never have to think about them. Unlike other tabs, you don’t worry about problems with barnacle growth, maintenance or winter storage. Unless physically damaged, they last forever.
Did you find this review helpful?
Steve
February 10, 2015
business , Foxboro, MA
Last 17 years
I’ve been fishing the Northeast for over 35 years. Every boat I’ve owned has had Bennett Trim Tabs. My last set lasted 17 years and was still working perfectly when I sold my boat.
Did you find this review helpful?
Ron
February 10, 2015
Captain , business , Islamorada, FL
Great customer service
The original Bennett Trim Tabs on my 1973 SeaCraft work perfectly, even after 34 years of use in salt water. No one makes a product this durable or stands behind their customers like Bennett.
Did you find this review helpful?
Cameron and Chris
February 10, 2015
business , Reddington Beach, FL
Highly recommended
With our dad’s help we started a complete redesign and rebuild of a 1973 Seabird. The motor, deck, transom, steering, instrumentation . . . everything was replaced. Except for one, the original Bennett Trim Tabs.
Did you find this review helpful?
1 2

Get the latest yachting news and content

Delivering the latest in yachting news, features and advice, our newsletter delivers a snapshot of the yachting industry every month.

By signing up, you agree to our Terms of Service and Privacy Policy.